Mēs izmantojam dažādas sīkdatnes, kas atrodamas tālāk norādītajā sarakstā. Nepieciešamās sīkdatnes ir būtiskas mūsu vietnes darbībai, tāpēc tās ir iestatītas pēc noklusējuma. Visas pārējās sīkdatnes palīdz mums veidot mūsu tiešsaistes piedāvājumu atbilstoši jūsu vajadzībām un pastāvīgi to uzlabot. Statistikas sīkdatnes palīdz mums saprast, kā apmeklētāji mijiedarbojas ar mūsu vietni, vācot informāciju anonīmi. Mārketinga sīkdatnes ļauj mums uzlabot mūsu vietnē piedāvātos produktus. Jūs varat pārvaldīt šīs sīkdatnes, noklikšķinot uz zemāk redzamās pogas. Jūs jebkurā laikā varat piekļūt iestatījumiem mūsu vietnē un tos attiecīgi mainīt.
The basic structure of this rim seat is a horse shoe shaped hot zinc dipped steel tube with 38mm diameter. On both sides about 100mm behind the opening 175mm long handles with 32mm diameter are welded which are covered with a vinyl cover for better grip. Behind each grip a tube facing outward is welded. On its end there is a spring pushbutton. Using this button the legs which are put onto this tube can be adjusted to three heights: 410mm (550mm clearance between the legs), 380mm and 515mm clearance and 350mm with 495mm clearance. When you push the legs up all the way the height is 330mm with 460mm clearance. But since the spring pushbuttons are not holding the legs they can move. The legs are T-shaped and the ends are covered in conic shaped rubber covers which create a secure stand and keep the legs from scratching the floor.
Detail of the Spring Pushbuttoms for the Heights Adjustment
For a comfortable seat for even extended periods of time a black horse shoe shaped toilet seat with a 10cm opening is mounted onto the ring. The seat can be tipped up.
When the legs are taken off, the rim chair becomes very compact for easy storage and for travelling.
Playing with the Rim Chair
First things first: Is this a good rim chair? Yes, it is. It has a sturdy and ergonomic build so the tops sits securely and comfortable. The grips make it easy to sit down and get up. The three height settings and clearance between the legs allow even for a slim bondage board to be put between them. All pieces are easy to clean so even when the play gets nasty the rim seat shines again quickly.
Detail of the Vinyl Covered Grip
When used alone the comfortable position and ass accessibility makes this rim chair ideal furniture for anal self play. The sphincter is relaxed even when reaching down to stuff the butt so putting toys up the ass is more easily and pleasurable. Beyond that this rim seat even has a practical use: When setup in a shower or bath tub a bottom can sit down on it for a comfortable cleaning up. Through the comfortable sitting position the colon relaxes and cleaning out is more easily. There is a chance of water entering the legs through the height adjustment holes. So after cleaning out the legs should be taken off and emptied.
The rim chair even works as a compact and basic piece of bondage furniture. Wrist and ankle restraints can be attached to the legs. The most effective bondage layout is fettering the thighs to the grips using Velcro restraints. This leaves the legs spread apart so the balls and dick can be played with, ideal for CBT, especially ball busting and kicking.
Sitzt knalleng und ist richtig geil. Also wer so was schon immer mal so eine Bondage-Maske tragen wollte, aber nicht 200 bis 300 € für eine Ledermaske ausgeben will ist damit sehr, sehr gut bedient.
Ich habe mir die Teile in 10mm und 11mm Gekauft.Hatte erst bedenken das es einwenig zu Groß sein könnte,aber mit einwenig Gleitgel und Geduld flutschen sie wie von selbst hinein.Selbst meine Frau, die erst bedenken hatte,machen diese Teile Spaß um sie bei mir Anzuwenden.
article commandé avec beaucoup de craintes .... Mais en fait c'est génial !!!
l'article n'a pas d'odeur (c'est déjà bien), et est en silicone complet.
Parlons de l'utilisation du cul, ça fait un peur, le trou parait tout petit mais il s'élargit très bien. De plus, le trou traverse de part en part, ce qui permet d'éjaculer et de nettoyer correctement.
Pour ce qui est du pénis, il est en silicone doux et est renforcé par un système qui lui permet de rester droit et facilement insérable tout en restant flexible.
Tolle Sache. Kann man nur weiterempfehlen. Nach ein wenig Eingewöhnungszeit wird man dieses tolle Spielzeug nicht mehr missen wollen. Versand war schnell und diskret.
A chaque fois que je l'utilise, et ce depuis plus de trois ans, c'est toujours une garantie d'avoir orgasme sur orgasme. une quinzaines de positions possible, à mon actif, vous assure plein de possibilités. Très silencieuse, vraiment!!, un moteur puissant même à faible cadence , que demander de plus...
Dr Sado’s Total submission device is essentially an all-in-one cock and ball torture sex toy. It comprises of a metal butt plug fixed to a bar that follows onto two metal clamps for the testicle’s separating them and crushing them simultaneously, at the end of the product is a penis clamp, and finally an O-ring is attached to the end for playfully sadistic tugging (and may even work as a pull in extreme cases of tug of war). So you have cock and ball crushing, and anal penetration, all at once.
The device is made from chrome plated stainless steel and weighs a whopping 953 grams. It comprises of a butt plug, a ball crusher, and a penis crusher, all put together as a form of CBT torture rack. Its total length is 10 inches and the maximum width it can be is 4 inches.
The butt plug is a cone shape style and has a total insertable length of 3.5 inches and circumference of 4.25 inches.
The ball clamp can be widened at one side to a maximum of 1.6 inches, meaning that you have an ample amount of room to pop one testicle through and then you can tighten the device around it to allow room for the opposite side to be threaded between the bars before tightening. The ball crusher can be placed into two positioned, one being closer to the butt plug than the other; however, you may need a spanner of pliers to do this.
The penis clamp can be made to a maximum of 2 inches. It can be placed into 6 different locations, each around 1 cm further away from the butt plug. At the front of the device is an O-ring perfect for attaching a lead or rope.
When first looking at this device it may look like one of those magic wire puzzles as there’s a lot going on, but it’s a lot simpler to use than I imagined. With my submissive lying on the massage bench, I made him draw his feet towards his bump allowing me to have complete access to his anus and genitals. After applying a fair amount of lubricant to his anus the metal plug slipped in easily.
Next in line was using the ball crusher part. I had made sure that the nuts had been unwound to the maximum width making popping through each testicle fairly easy (although with one sub I wasn’t able to thread each ball individually through each separate clamp, instead I just popped both through one side which still did the job well). It’s worth noting that there are two different positions the testicle clamp can be placed, meaning that if there’s a larger distance from the balls to the rectum then you can move the clamps closer of further depending on the submissives individual anatomy.
Finally, you can thread the penis shaft through the penis clamp. You can have the penis clamp closer to the ball clamp or further away, depending on what’s easiest. Or simply you can have it positioned further to stretch the flaccid clamped penis. Although, my personal favourite is to bring the flaccid penis over the top of the clamp, then threading it in backward before tightening the metal bar down onto the glans.
Using the O-ring to tug and cause extra sensation can be hit and miss. If my submissive is bound and laying on his back it is fine, however, if my sub is trying to walk around with this device inserted into his body sadly the butt plug falls out. I’m a great fan of humblers and was hoping for slightly similar results where I’d be able to walk my sub around, yet sadly this isn’t possible due to the butt plugs stem being far too short to really nestle into the body.
When cleaning this device you may want a soft bristle tooth brush to help clean the threads of the bolts. As it is chrome plated metal it can be washed in wash water with antibacterial soap or even placed into the dishwasher for a carefree clean-up.
Overall, this product works best when a submissive is lying down and is being very still. Too much movement and the plug can pop out. It’s still fun to use, but if you’re looking to use this device on a moving sub then you may want to look out for one that either has a longer stem on the butt plug or a curved plug rather than coned.
Read full review: http://nymphomaniacness.com/dr-sados-total-submission-device/
